The Toshiba T100X Dynapad is a small penbased 386 computer. It runs Windows for Pen and DOS, etc. There were several different models of these...

• DynapadTM T100X 40MB Windows for Pen Computing- PC1069U-P3A (FCC ID# CJ6UK345)
• DynapadTM T100X 40MB PenRight! - PC1069U-P5A (FCC ID# CJ6UK345)
• DynapadTM T100X 80MB Windows for Pen Computing - PC1070U-P3A (FCC ID# CJ6UK456)
• DynapadTM T100X 80MB PenRight! - PC1070U-P5A (FCC ID# CJ6UK456)

The T100X can be used in either portrait or landscape mode (turned lengthwise). Windows for pen has an option to "turn" the display accordingly.

Some specifications for the T100X are as follows:

• CPU: AM386TMSXLV-25MHz; 3.3 volt operation
• MEMORY: 4MB standard, 3.3 volt operation (640KB conventional memory plus 3,456KB which can be configured as RAMdisk (HardRAM), expanded (LIM/EMS 4.0) and/or extended memory, shadow BIOS ROM. Memory expandable up to 20MB using 4, 6, or 16MB user installable credit card style memory
• HARD DISK: One 40MB or 80MB hard disk drive (Proprietary 1.8" IDE drive, smaller than 2.5")
• STYLUS (PEN): Single button for primary mouse button emulation Pocket clip and loop for optional tether Replaceable tip (one included) Uses 4 batteries Automatic sleep mode after 1 minute of non-use
• DISPLAY: 9.5" Diagonal backlit grayscale 640x480 VGA screen capable of 16 shades of gray
• Dimensions: 10.6"W x 8.3"D x 1.5"H
• Weight: 3.3 lbs. with battery pack
• Power Input: 12VDC
• Battery: Removable rechargeable 7.2V, 1500mAH Nickel Hydride battery pack 1.5 - 2 hr.battery life per pack;recharges in 3 hrs.
• COMPATIBILITY: Compatible with software written for the IBM PC/XT/AT using VGA, EGA, or CGA resolution graphics modes
• INTERFACES: 2 PCMCIA 2.01 compatible slots (one each Type I, and Type II), 9 pin RS-232-C serial port, Parallel printer port (adapter required & included), PS/2 keyboard port, Credit card style memory slot Toshiba proprietary, external 1.44MB 3.5" FDD connector, Kensington cable lock slot